How to remove shellac at home

click fraud protection

Many women are interested in this topic. It is worth telling about the lacquer itself. This agent is used as a substitute for a gel or acrylic. This substance is applied to the nails to give them beauty. The basis is a biogel, which has many similarities compared to conventional varnish. Let's take a closer look at how to properly remove shellac at home.

Exact definition of mixture- gel. After application, it is necessary to dry it under an ultraviolet lamp. Advantages are such properties:

• does not break;
• does not crumble;
• keeps on the nail for a long time and the service life is about two weeks;
• has a huge set of colors.

Important to know: on the feet of shellac holds about five weeks.

Now it is necessary to tell as much as possible about the procedure for removing shellac.

Removing shellac

You can carry out the procedure not only to save money. Knowledge of methods for removing the described biogel is useful if the picture on nails is boring or you just need to remove the lacquer. You can remove the varnish from the nails.

Description of the first method - with foil

The whole process resembles the algorithm for removing extensible nails on an acrylic base. The difference is that you do not need to cut anything. To begin with it is necessary to say about the tools that will be required:

• wool in any form. It is desirable to have disks;
• is not a very large piece of foil;
• liquid that removes manicure, made on the basis of acetone;
• nail file;
• any adhesive tape or plaster;
• chopsticks.

Before the procedure, hands should be washed with soap and water. After cutting the cotton pad in a convenient way, so that it fits well under the nail plate or stratify it and split it in half. Semicircles should be obtained. You can simply roll the disc into the funnel and cut off a small piece from the sharp end. If there is no desire to mess around with the disks, then use specialized linings for removing shellac.10 pieces will cost 200-400 rubles.

Important to know: on the skin around the treated area, you can apply the cream to prevent damage to it.

After cutting, you need to moisten the resulting pieces in a special solution based on acetone or in the means for removing shellac. The cost of such a bottle is about 250 rubles.

Treat the desired nails with this solution and wrap some part of the finger in the previously prepared foil, without removing the cotton wool, wait about 15-25 minutes. If you use a special tool, then the necessary time can be seen on the label. After application, the chemicals begin to interact, shellac softens and slightly exfoliates. While waiting, you can do mild massage movements. The better the cotton wool and foil adhere to the nail, the better the effect will be, but do not overdo it.

It is important to know: it is necessary to do it very carefully, so as not to harm both fingers and skin.

After this time, the foil is removed. This is done in turn.

Then proceed to remove the varnish coating using a special spatula or stick. It is important not to strongly press: the surface of the nail can be damaged by one movement.

If there are areas that can not be removed, then the nail should be treated with a liquid to remove varnish and scrape off the remains of shellac with a stick. If necessary and desire, you can slightly polish the nails with a small nail file.

At the end of the procedure, the nails and the adjacent skin are advised to be treated with oil that moisturizes and nourishes the surface.

Description of the second method - how to remove shellac without foil

To remove shellac on its own, you can buy a special set or buy everything separately:

• wrappers with sticky edges that can only be used once. They are also called sponges;
• wooden or plastic sticks;
• nail polish remover;
• oil for moisturizing the skin.

At the first stage, hands are washed with soap to get rid of excess fat. Sponge is wetted in a special solution and envelops the extremity of the finger along with the nail. Do not remove the wrapper, you need to put your fingers in a container with a solvent or a means for removing varnish. After all the procedures described above, you need to release your finger and remove from the nail the entire layer of shellac with a cooked stick. It only remains to lubricate the skin around the oil.

It is important to know: such a method is not as effective as the first one. Often there are remains of shellac, they must be removed manually.

Used tools

There are many different solutions that will help to remove shellac at home on your own. Many people do not know how to remove the sticky layer of shellac, so they use various drugs that are not effective. But for this procedure there are special preparations. The most common is the CND Remover. It is used to remove conventional varnish, biogel and shellac. A special feature is the moisturizing of the skin when applied.

Severina

Used for removing the same varieties of nail coatings, as in the previously described substance. The peculiarity is that acetone is not present in the composition. This remedy can be used both on natural nails and on artificial nails.

Acetone

One of the most common methods that can be removed shellac - acetone. It removes the varnish to cheers in just 15 minutes, but getting on the skin is undesirable. It may irritate, a burn may occur if there is an allergy to this substance. Put acetone on a cotton pad, attach to nails and hold for several minutes, then gently wipe until completely cleansed. Wash your hands thoroughly and oil them with any nourishing cream.

Solvent-based fluid

Has the same characteristics as acetone. The difference is only in the concentration and reduced chance of an allergic reaction.

There are several other similar products: Masura, Solomeya and a couple of others, which contain vitamin F and a moisturizing component. They will help to quickly remove shellac from the nails at home, without visiting the salon.

Care after removing shellac

Shellac is not a corrosive substance, however it is recommended to take care of nails. Particular attention should be paid to those girls who have a problem of lamination or thinning of the nail plate. After removing shellac, this kind of inconvenience can be complicated. Before using it is advisable to visit a specialist and consult.

Important! How to strengthen nails at home, the most simple and effective ways - you can read in our article.

It is worth remembering that after removing shellac nails, it is advisable not to paint for several weeks. During this time, everything will be restored and there will be no negative consequences. It is not superfluous to carry out procedures for their marigolds in saline solution and in the form of special oils that contain vitamin E.

If after removing the shellac the nail becomes very thin, then such a tool as Trind can help. It is recommended to use it every day. The substance is applied as a normal lacquer. It is noticed that the approximate time of complete restoration of the nail is about 3 months.

For remedial procedures, a tool that can be easily manufactured is suitable:

• add in 50 grams of water a tablespoon of salt, preferably marine, and a couple of drops of iodine;
• keep in this solution nails for no more than 20 minutes.

This procedure has a beneficial effect on the growth and strengthening of the nail.

Important! If after removal of shellac nails puff, how to treat at home read in our article!

Small tips

1. If you over-rest your fleece with acetone or any similar substance, you can get a burn, which will be very bad.
2. Remove the foil one by one, but from all fingers, and afterwards start removing the shellac.
3. After removing the varnish, you can moisten your hands with a special oil or other composition. The skin will not dry as on the entire handle, and in the nail area.
4. If this procedure was not previously done, then it's best to see at least some videos on this topic or read a couple of articles.
5. You can remove shellac on your hands or on your legs.

In conclusion, it can be said that it is very easy to remove shellac at home. The main thing is to follow the basic rules and not overdo it with the processing time. Such methods are available to everyone without exception.